Lift Series

  • Home
  • Product Catalogue
  • Lift Series
  • Column-mounted cantilever crane, single-arm crane, wall-mounted crane, swivel crane. 1 ton, 2 tons, 3 tons, 5 tons. Electrically rotating 360 degrees, 180 degrees.
Item 2
Electric cantilever crane maximum load:2 ton Total height of the machine:5m Total length of the machine:5m The maximum height is 3.5 meters.
Electric chain hoist Chain length: 4 meters Lifting speed: 6.8 meters; Running speed: 11 meters Lifting motor: 3.0 Kw, Operating motor: 0.4 Kw
control mode wireless remote control
colour customize
Rotation method electric
rotation angle 0 to 360
Column material Pipe diameter 530mm
Crossbar material 250mm I-beam steel and 150mm x 150mm square tube
Production technical plan The column of the jib crane is fixed to the ground using either a pre‑cast concrete foundation or chemical anchors, depending on the on‑site conditions. The column and the rotating arm of the single‑arm crane are connected by a rotating shaft. During operation, the lifting and lowering are controlled electrically, while the rotation of the arm is done manually. The jib crane operates on a 380V power supply.
Equipment protection method The hoist has upper and lower limit switches. The hoist also has left and right (polyurethane contact points)
operating mode

The electric hoist on the crossbeam of the cantilever crane ascends and descends, and the crossbeam rotates left and right. It is operated by a wireless remote control.

Item 1
Electric cantilever crane maximum load:1 ton Total height of the machine:4m Total length of the machine:4m The maximum height is 3 meters.
Electric chain hoist Chain length: 4 meters Lifting speed: 6.8 meters; Running speed: 11 meters Lifting motor: 1.5 Kw, Operating motor: 0.4 Kw
control mode wireless remote control
colour customize
Rotation method electric
rotation angle 0 to 360
Column material Pipe diameter 377mm
Crossbar material 200mm I-beam steel and 120mm x 120mm square tube
Production technical plan The column of the jib crane is fixed to the ground using either a pre‑cast concrete foundation or chemical anchors, depending on the on‑site conditions. The column and the rotating arm of the single‑arm crane are connected by a rotating shaft. During operation, the lifting and lowering are controlled electrically, while the rotation of the arm is done manually. The jib crane operates on a 380V power supply.
Equipment protection method The hoist has upper and lower limit switches. The hoist also has left and right (polyurethane contact points)
operating mode The electric hoist on the crossbeam of the cantilever crane ascends and descends, and the crossbeam rotates left and right. It is operated by a wireless remote control.




Hello, friend! Just tell me what your requirements are for this product
and I will help you handle your purchase needs for it.

If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!